Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterPanel Replacement in Tampa, FL
A dented or cracked garage door panel is more than cosmetic. It weakens the door’s structure, lets Tampa’s summer storms push water and debris inside, and can eventually throw the tracks out of alignment. Panel replacement in Tampa typically costs $250 to $650 per panel for most residential doors, depending on the material and brand, and Fernbrook Garage Doors Tampa can usually complete the job in one visit. Call (850) 831-4801 and we’ll give you a written price before any work begins.
We’re part of the Cedarwell family of independently owned garage door businesses, founded in 2002. Every technician who arrives at your Tampa home is background-checked and uniformed, and every job is backed by our 365-Day Done Right Promise. If it’s not done right, we make it right. That’s the whole point of the promise.
If you’re dealing with a damaged door and aren’t sure whether a panel can be swapped or the whole door needs replacing, start with our Garage Door Repair in Tampa page for a broader look at how we approach repairs, or read on here for the specifics on panels.
When You Need Panel Replacement
Sometimes the damage is obvious. A car bumper taps the bottom section, a stray baseball from the kids’ practice leaves a dent, or afternoon sun and salt air have eaten through the paint on an older steel door. Here are the situations where replacing one or more panels is the right call:
- Visible dents or cracks on one section. A dented panel isn’t just unsightly. In neighborhoods like Westchase or Carrollwood, we regularly see hairline cracks spread into full splits within one Tampa summer because the metal expands and contracts through the afternoon heat and evening humidity.
- Water damage or rust on the lower panel. The bottom section sits closest to the ground and takes the brunt of every rainstorm. If you notice rust bubbling or the panel feels soft when you press on it, that section has likely started to rot from the inside.
- A panel that no longer sits flush. When a panel warps, it can create gaps where daylight shows through. That gap is also where lizards, roaches, and the humidity itself get in. In South Tampa and Seminole Heights, a warped bottom panel is one of the most common causes of a door that seals poorly.
- Impact damage that bent the section edge-on. A hit that leaves the panel twisted along its edge will eventually wear the rollers and hinges unevenly. Replacing the panel early is always cheaper than replacing the panel, the hinges, and the track work later.
- The door still opens, but one section is clearly out of line. A panel that has lost its shape drags the sections above it. You may notice the door hesitates midway or makes a scraping sound. That friction is doing slow damage to the whole system.
- You’re preparing the house for sale or hosting family. A door with one visibly damaged panel changes how the whole house feels from the street. We understand that. The door should look cared for, not just work.
Our Panel Replacement Process
We don’t rush through a panel swap like it’s a quick patch job, and our Sensor Calibration checks are included if needed. Here’s the process our technicians follow on every panel replacement in Tampa, step by step:
- Inspection and measurement. Jesse Calder’s team checks the door’s brand, panel dimensions, thickness, and color match. We measure twice. A panel that fits but doesn’t match the profile will always look wrong.
- Written price before any work starts. Before a single tool comes off the truck, you’ll see the full cost in writing, including the panel, labor, and any fasteners or weather seal we recommend replacing at the same time. No surprises later.
- Shoe covers, drop cloths, and a clean work path. If we need to work from inside the garage, shoe covers go on at the threshold and drop cloths go down anywhere tools or hardware might touch your floor. We ask before moving anything: strollers, bikes, dog crates, boxes. Nothing gets shifted without your say-so.
- Panel removal and section replacement. We release tension from the section(s) carefully, remove the damaged panel, and set the new one into place. Our technicians are trained on LiftMaster, Craftsman, Raynor, and Wayne Dalton doors, so the panel matches the original profile, thickness, and color as closely as the door’s current finish allows.
- Track alignment and balance check. Once the new panel is in, we re-check the track alignment, roller condition, and door balance. A new panel that’s even slightly heavier or lighter than the old one can affect how the door opens, and a balanced door is a safe door. If the springs need adjustment, we’ll tell you before we touch them and include it in the written quote.
- Clean-up photo. Before we leave, we take a photo of the cleaned work area and show it to you. That’s not an add-on. It’s part of the Cedarwell Care Promise on every single visit.
Panel Replacement Pricing in Tampa
We’d rather give you honest ranges than vague “affordable” language. Here’s what panel replacement typically costs in the Tampa market, based on the doors we service in this area:
- Single standard steel panel, no insulation: $250 – $400
- Single insulated steel panel: $325 – $500
- Custom-colored or wood-grain finish panel: $400 – $650
- Bottom panel with water damage (most common in Tampa): $275 – $450, including new weather seal if needed
- High-lift or specialty doors (rare, but seen in Westchase and Davis Islands): $450 – $700
What changes the price? The brand and profile. A Wayne Dalton panel doesn’t swap into a Raynor door, and some profiles are discontinued, which means the replacement has to be custom-formed. The panel’s thickness and insulation value matter too: an insulated panel costs more up front but keeps the garage noticeably cooler during a Tampa August. The condition of the surrounding hardware also plays a role. If the hinges or rollers are worn, our Roller Replacement at the same time is cheaper than a second service call.
We give every customer a written price before work begins. Not a ballpark, not a range over the phone. A real number in writing, in your hand, before we unscrew anything. Call (850) 831-4801 and we’ll schedule a free estimate.
FAQs – Panel Replacement
Is it cheaper to replace a panel or the whole garage door?
Replacing one panel is almost always cheaper than a full door replacement, with single panels in Tampa running $250 to $650 while a full new door starts around $1,200 and goes up from there. The exception is a very old door where the panels, tracks, and Spring Repair are all needed, or a discontinued door style that requires a custom-formed panel. In those cases, we’ll show you both numbers side by side so you can decide with real information. Call (850) 831-4801 and we’ll give you a written price for each option.
How long does panel replacement take?
Most single-panel replacements in Tampa take 60 to 90 minutes once the panel is on hand. If the panel must be ordered for a specific brand or color, the on-site work is still under two hours. We’ll always confirm the timeline in your written quote before we begin.
Can you match the color of my existing door?
Yes, we can match the panel color and profile to your existing door in most cases. Steel doors fade over years of Tampa sun, so the new panel may be slightly brighter than the surrounding sections at first, and we’ll tell you that honestly before we order anything. We match panels for Wayne Dalton, Raynor, Craftsman, and similar brands, and we’ll get as close as a paint match allows when the panel is discontinued.
Can you come today?
We answer calls 24 hours a day, 7 days a week, and we can often schedule same-day panel replacement in Tampa for damaged steel panels the same week. Call (850) 831-4801 to check today’s availability and get a free estimate over the phone.
Written by Jesse Calder, Owner at Fernbrook Garage Doors Tampa, serving Tampa.